shahrooz
08-26 10:45 PM
Thanks for your replies. I'm 99% sure all documents should be OK since I reviewed them maybe 10 times before finally mailing them. About extension, the customer service rep told me it's technically not possible. I'm not sure what she meant by "technically" and she sounded more like an answering machine with a few pre-organized lines and sentences, and she wasn't very helpful. So funny, at one point I asked her :"Excuse me, is this a real person I'm talking to?" and she said :"Yes sir!" with a little tingle in her voice. :D
I'm going to try customer service once again tomorrow & see what happens. Maybe I get lucky and talk to someone a bit less similar to a Humanoid!
gc_chahiye: Thanks for the technical advice. I'll check with my attorney tomorrow. You said 30 odd days. That is more or less 60 days, and it's more than enough. Meanwhile, I'll prepare the work experience letter and hope for the best, although whatever has happened to me in this country, has been kinda ... well, the worst.
I'm going to try customer service once again tomorrow & see what happens. Maybe I get lucky and talk to someone a bit less similar to a Humanoid!
gc_chahiye: Thanks for the technical advice. I'll check with my attorney tomorrow. You said 30 odd days. That is more or less 60 days, and it's more than enough. Meanwhile, I'll prepare the work experience letter and hope for the best, although whatever has happened to me in this country, has been kinda ... well, the worst.
diptam
08-20 09:22 PM
Last months 3 days , this month 11days movement only for I-140 skilled !!
Looks like NSC staffs are all busy opening July 2nd packets :D
https://egov.uscis.gov/cris/jsps/Processtimes.jsp?SeviceCenter=NSC
That's for NSC.
Looks like NSC staffs are all busy opening July 2nd packets :D
https://egov.uscis.gov/cris/jsps/Processtimes.jsp?SeviceCenter=NSC
That's for NSC.
voldemar
02-27 05:11 PM
6) The simple logic is, eb1 has higher qualifications than eb2, and eb2 has more qualifications compared to eb3. If you believe they treat everyone the same, then be happy and stick with your belief.That's true. Also EB3 cases are the easiest, EB2 a little more complex and EB1 the most complex. USCIS officers tend to do easiest job more often ;)
gconmymind
08-29 12:33 PM
My wife's H1 was applied by her Indian company's US office in March 07 and got approved in July 07. She was in India at that time. We got married in July and she came to the US on H4 in Dec 07. Then, she went to Kolkata in Mar 08 (we are from Mumbai region) to get her H1B stamped and got the stamp and started working in Apr 08.
So, if you are returning from US to get a H1B stamp, you can go to any consulate in India.
You can go to Canada or Mexico, but chances are security clearance can delay the process. We did not want to take a chance and chose Inida for stamping.
So, if you are returning from US to get a H1B stamp, you can go to any consulate in India.
You can go to Canada or Mexico, but chances are security clearance can delay the process. We did not want to take a chance and chose Inida for stamping.
more...
JoeSixpack
09-04 07:06 PM
I never got kWordpad to do this for me. Though after you mentioned it, I went back and took another look. I noticed that if upon opening the window, I clicked on the Bold button first and then went and began typing, the Bold button would return to an unChecked state and my text would not be bold. However if I first clicked once inside of the rich textbox and then clicked the bold button, when I started typing the text would be bold.
So I went into the source and added: "this.MainRichTextBox.Focus();" directly benieth “InitializeComponent” to the Window1.xaml.cs file, so that the rich textbox would already have been ‘clicked’ upon opening and now it works just like wordpad as far as applying styles.
Are you getting similar behavior or not? If its working differently for you, is there any chance you know whats happening here?
Either way, thanks for making me take a second look. And just while I have you on the line, I want to tell you I love the website. The tutorials here are great. Most sites simply give snippits, but don’t give you all of how they achieved this or that feature. So its nice to know that when I start something here, all of the info I need to finish it or get it working is included. I'm looking forward to more in the WPF field.
Thanks again.
P.S. Just as a side note I was curious why you have:
private void SelectDefaultFont()
{
FontFamilyCombo.SelectedValue = "Arial";
}
in the Window1.xaml.cs file when the Selected Index is already set in Expression Blend (0).
Just for fun I changed it to: SelectedValue=”Calibri” in the C# file and left the Selected index in Expression Blend at 0. Now when I run kWordpad the combo box has Calibri set as the defualt but resets to Arial as soon as I begin typing in the rich textbox.
What makes this really odd to me is that if it is being set by the selected index in Expression Blend, then the selected index would have to be set at 9 on my computer in order for it to choose Arial as the default (for me 0 is Abyssinica SIL). So where is it getting Arial from; and how is it that it is ignoring both the SelectedDefaultFont and the SelectedIndex? I realize this may seem tedius, but I just hate not knowing... "to be continued" at the end of a tv show makes me nuts too; I'm seeking help.
So I went into the source and added: "this.MainRichTextBox.Focus();" directly benieth “InitializeComponent” to the Window1.xaml.cs file, so that the rich textbox would already have been ‘clicked’ upon opening and now it works just like wordpad as far as applying styles.
Are you getting similar behavior or not? If its working differently for you, is there any chance you know whats happening here?
Either way, thanks for making me take a second look. And just while I have you on the line, I want to tell you I love the website. The tutorials here are great. Most sites simply give snippits, but don’t give you all of how they achieved this or that feature. So its nice to know that when I start something here, all of the info I need to finish it or get it working is included. I'm looking forward to more in the WPF field.
Thanks again.
P.S. Just as a side note I was curious why you have:
private void SelectDefaultFont()
{
FontFamilyCombo.SelectedValue = "Arial";
}
in the Window1.xaml.cs file when the Selected Index is already set in Expression Blend (0).
Just for fun I changed it to: SelectedValue=”Calibri” in the C# file and left the Selected index in Expression Blend at 0. Now when I run kWordpad the combo box has Calibri set as the defualt but resets to Arial as soon as I begin typing in the rich textbox.
What makes this really odd to me is that if it is being set by the selected index in Expression Blend, then the selected index would have to be set at 9 on my computer in order for it to choose Arial as the default (for me 0 is Abyssinica SIL). So where is it getting Arial from; and how is it that it is ignoring both the SelectedDefaultFont and the SelectedIndex? I realize this may seem tedius, but I just hate not knowing... "to be continued" at the end of a tv show makes me nuts too; I'm seeking help.
kumhyd2
07-26 01:08 AM
Another classic case of utter negligence by the attorneys.
more...
skynet2500
10-19 01:00 PM
Hello,
My EAD (based on I-485 for EB-3; PD - July 2003) expires in the first week of Nov and I applied for my renewal in August and got a notice stating that my application has been received and it will be processed.
I have not received the new EAD yet (status on the website says 'Initial review') and chances are that I may not get one before the current EAD expires.
Am I dead in the water? Both my wife and I need EAD as our H1 has expired and we have changed jobs.
Obviously I am worried sick,
Any help, pointers, suggestions are much appreciated.
Thanks,
Few Suggestions..
Contact USCIS to expedite the case. Usually they do it 90 days after they received the case. After this do the following..
- Contact ombudsman office
- Contact local senator office.
- Contact local congressman office
Good Luck.
My EAD (based on I-485 for EB-3; PD - July 2003) expires in the first week of Nov and I applied for my renewal in August and got a notice stating that my application has been received and it will be processed.
I have not received the new EAD yet (status on the website says 'Initial review') and chances are that I may not get one before the current EAD expires.
Am I dead in the water? Both my wife and I need EAD as our H1 has expired and we have changed jobs.
Obviously I am worried sick,
Any help, pointers, suggestions are much appreciated.
Thanks,
Few Suggestions..
Contact USCIS to expedite the case. Usually they do it 90 days after they received the case. After this do the following..
- Contact ombudsman office
- Contact local senator office.
- Contact local congressman office
Good Luck.
pappu
07-28 11:29 AM
Old wine in a new bottle ---- this idea was actively discussed couple of months back. Many people committed to this type of contribution.
Let us see next month when EB2I will start getting lot of approvals. How many IV members contribute once they get GCs.
Let us see next month when EB2I will start getting lot of approvals. How many IV members contribute once they get GCs.
more...
ngopalak
05-22 08:39 AM
Sounds like a great positive move with Patton Boggs
getgreensoon1
03-15 11:30 AM
Didn't most of us came to US through "Desi Companies/Body Shopper/Outsourcer"?
Now that we are feeling the pinch, we want to close this door for the other folks?
Guys, this is pinnacle of hypocrisy. Please convince me how this is different from the Anti Immigrants??
Please note. I have no axe to grind and I have never worked for Desi Company/Body Shopper/Outsourcer.
You may have ....I did not. The so called software professionals have no other avenue than coming through the bodyshops. Infy, TCS and Wippro are no different than other desi bodyshops. Its the difference between a nice hair cutting saloon and a road side one. Infy, TCS are nice hair cutting saloon.
Its not a question about feeling the pinch. Its about the validity of credentials. Most of underskilled people get undue advantage by working at these bodyshops.
Now that we are feeling the pinch, we want to close this door for the other folks?
Guys, this is pinnacle of hypocrisy. Please convince me how this is different from the Anti Immigrants??
Please note. I have no axe to grind and I have never worked for Desi Company/Body Shopper/Outsourcer.
You may have ....I did not. The so called software professionals have no other avenue than coming through the bodyshops. Infy, TCS and Wippro are no different than other desi bodyshops. Its the difference between a nice hair cutting saloon and a road side one. Infy, TCS are nice hair cutting saloon.
Its not a question about feeling the pinch. Its about the validity of credentials. Most of underskilled people get undue advantage by working at these bodyshops.
more...
nixone
07-30 05:09 PM
Nixone;
I really hope / wish you don't get audited.
DOL claimed that the newspaper ad was sent to them without the date of it. So we sent them back the whole paper-page where the date is usually printed at the very top with my job ad on it.
Good luck...
I hope so too and thanks for your reply. I am still confused. As far as I know, you are not supposed to send/submit any supporting documents with your LC application unless it is asked for in a later date.
Now my question is, did they ask you to submit the newspaper ad some point after your manager/lawyer submited your LC application online? It seems like you sent the just ad part and they were not satisfied with it and asked more evidence and you sent the whole page again. Did they deny your LC after you sent the whole page ad or what point did they deny it?
I really hope / wish you don't get audited.
DOL claimed that the newspaper ad was sent to them without the date of it. So we sent them back the whole paper-page where the date is usually printed at the very top with my job ad on it.
Good luck...
I hope so too and thanks for your reply. I am still confused. As far as I know, you are not supposed to send/submit any supporting documents with your LC application unless it is asked for in a later date.
Now my question is, did they ask you to submit the newspaper ad some point after your manager/lawyer submited your LC application online? It seems like you sent the just ad part and they were not satisfied with it and asked more evidence and you sent the whole page again. Did they deny your LC after you sent the whole page ad or what point did they deny it?
gconmymind
09-23 04:47 PM
:D:D Great sense of humor....or are serious?
I think he is serious. 485 receipt numbers may not be in sequence. Eg. TSC may assign one receipt number to 485 and the next one to 765.
This is my understanding
I think he is serious. 485 receipt numbers may not be in sequence. Eg. TSC may assign one receipt number to 485 and the next one to 765.
This is my understanding
more...
jliechty
July 5th, 2006, 07:57 PM
You're aware of the metering limitations (or really, none at all) of the D70 with manual focus lenses, and if you're set on outboard metering, you won't be affected. 6MP vs 10MP isn't that big of a difference until you start printing large (I'd say something greater than 11x17, but that depends on subject matter and personal taste). The D200's viewfinder is much better than the D70's, in my opinion from having used both (but unfortunately not side by side). The build quality is better, but I think both cameras would stand more rain than the average photographer (if you love standing in a downpour for hours, you're the exception, and you should get a waterproof bag no matter what camera you choose ; ).
I wouldn't worry so much about "outdated" technology. The D70 still takes great pictures, so don't let anyone convince you that it would be like driving a 25 year old beat-up car. While I'd just get the D200 (err, uh, I already did), if the expense is a concern, or if you don't need the features of the D200 but aren't sure if the D70 would be enough, consider these possibilities:
Try a D70 and a D1h - those two bodies used would together cost less than a D200, and would give you a camera for high resolution work and another for high speed/high ISO with better build quality, viewfinder, etc. albeit lower resolution and battery life.
Alternately, a slightly less expensive choice would be to get a single D1x. This gives the build quality advantages of the D1h along with as good of (or sometimes better) resolution as the D70, although battery performance would be lacking (you'd need two or three batteries for a full day of shooting, depending on LCD usage). The D1 series is capable of using center weighted and spot metering with AIS lenses, though matrix metering is disabled (the D200 can do matrix metering as well, when the lens data has been entered manually).
I wouldn't worry so much about "outdated" technology. The D70 still takes great pictures, so don't let anyone convince you that it would be like driving a 25 year old beat-up car. While I'd just get the D200 (err, uh, I already did), if the expense is a concern, or if you don't need the features of the D200 but aren't sure if the D70 would be enough, consider these possibilities:
Try a D70 and a D1h - those two bodies used would together cost less than a D200, and would give you a camera for high resolution work and another for high speed/high ISO with better build quality, viewfinder, etc. albeit lower resolution and battery life.
Alternately, a slightly less expensive choice would be to get a single D1x. This gives the build quality advantages of the D1h along with as good of (or sometimes better) resolution as the D70, although battery performance would be lacking (you'd need two or three batteries for a full day of shooting, depending on LCD usage). The D1 series is capable of using center weighted and spot metering with AIS lenses, though matrix metering is disabled (the D200 can do matrix metering as well, when the lens data has been entered manually).
amitjoey
01-23 02:58 PM
Thanks, you are real hope for the thousands of people affected by retrogression.
more...
devikas81
06-16 08:12 PM
EB2 India..My 140 has been approved in May.07, also got EAD/AP but my employer doesnt want to give me Receipt Notice or Approval Notice of 140... So can i leave this company and join different company...
Pls. advise
Pls. advise
maddipati1
02-04 06:11 PM
i used to think based on I-131 instructions that, if we leave before AP aprroval, its considered abandoning 485. but my lawyer clarified that, thats true only if u dont have any oher status than AOS. if i leave before AP approval i can use H1 stamp to get back in and use AP for travel next time.
thx LIGP
thx LIGP
more...
larmani
10-25 06:26 PM
We went to SanJose Charcote dr. last saturday. Our appointment was at 3pm. But we went at around 1PM as our daughter has a tutoring class between 2-4. They accepted and let us do at 1:15pm. It is cool and not much croud. There are around 10 FP machines and took about 15 min to finish. Our LUD changed next day on our 485 applications. But check the address one day before the appointment. As it shows 122 charcote dr. inside But outside you would see 5 digit numbers and you would easly miss. Also you will not see USCIS on outside board(it shows as some Application center).
IneedAllGreen
06-21 05:03 PM
thanks for your input. But tell me if you have taken photos at CVS and your experience with quality of photos from that store.
Go to local CVS store
Go to local CVS store
Kitiara
10-17 10:52 AM
Argh, I don't have Paintshop Pro!
BECsufferer
07-30 09:30 AM
Thanks.
Now something that had been on top of my mind for long. Does anyone know how to make Google include subjective interpretation to search query? I will elaborate ...
Say you want to search for all the work been done or being done on say "teapot". Normally you type in "teapot" in search bar and Google will dump millions of results. And those results would be screened objectively based on the search query i.e. "teapot". But interestingly, "kettle" is also a synomous for "teapot" but since the search was objectively driven, this subjective association would be excluded. This is just an example, I framed to explain my point.
A quick answer to above would be to include any synomous words, but we all know in techonological world and especially in the IP area, their could numerous ways to hid the information while maintaining it on public forums. If you have been engaged in IP development, you will understand what I am talking about.
Now something that had been on top of my mind for long. Does anyone know how to make Google include subjective interpretation to search query? I will elaborate ...
Say you want to search for all the work been done or being done on say "teapot". Normally you type in "teapot" in search bar and Google will dump millions of results. And those results would be screened objectively based on the search query i.e. "teapot". But interestingly, "kettle" is also a synomous for "teapot" but since the search was objectively driven, this subjective association would be excluded. This is just an example, I framed to explain my point.
A quick answer to above would be to include any synomous words, but we all know in techonological world and especially in the IP area, their could numerous ways to hid the information while maintaining it on public forums. If you have been engaged in IP development, you will understand what I am talking about.
jungalee43
03-05 11:47 AM
Our friend from AL: - "interested in SAVE act". He wants to see it move in House.
Looks like there would be some debate. This way or that.
All the talk about Illegals. So nothing that they discuss apply to us. Though I missed something, they are not saying a word against us.
Looks like there would be some debate. This way or that.
All the talk about Illegals. So nothing that they discuss apply to us. Though I missed something, they are not saying a word against us.
0 comments:
Post a Comment