.gif "2011 irthday quotes for daddy.")
greyhair
07-08 11:23 PM
eb3retro, i think u & i need not as much worry about oscarzumaran et al..... as we should worry about those who remain silent..... day after day....
Why should we worry about those who are silent? What do you mean?
Why should we worry about those who are silent? What do you mean?
wallpaper 2011 irthday quotes for daddy.
sledge_hammer
06-05 07:33 AM
This is unsettling...
Revocation of Approved Labor Certifications
The DOL Perm rule, at 20 CFR 656.32 provides for the revocation of approved labor certifications by DOL if a subsequent finding is made that the certification was not justified. In such instances, DOL provides notice to the employer in the form of a Notice of Intent to Revoke an approved labor certification that contains a detailed statement of the grounds for the revocation and the time period allowed for the employer's rebuttal. The employer may submit evidence in rebuttal within 30 days of receipt of the notice. If rebuttal evidence is not filed by the employer, the Notice of Intent to Revoke becomes the final decision of the Secretary. If the employer files rebuttal evidence and DOL determines the certification should nonetheless be revoked, the employer may file an appeal under 20 CFR 656.26 within 30 days of the date of the adverse determination. If the labor certification is revoked, DOL will also send a copy of the notification to USCIS and the Department of State.
Revocation of Approved Labor Certifications
The DOL Perm rule, at 20 CFR 656.32 provides for the revocation of approved labor certifications by DOL if a subsequent finding is made that the certification was not justified. In such instances, DOL provides notice to the employer in the form of a Notice of Intent to Revoke an approved labor certification that contains a detailed statement of the grounds for the revocation and the time period allowed for the employer's rebuttal. The employer may submit evidence in rebuttal within 30 days of receipt of the notice. If rebuttal evidence is not filed by the employer, the Notice of Intent to Revoke becomes the final decision of the Secretary. If the employer files rebuttal evidence and DOL determines the certification should nonetheless be revoked, the employer may file an appeal under 20 CFR 656.26 within 30 days of the date of the adverse determination. If the labor certification is revoked, DOL will also send a copy of the notification to USCIS and the Department of State.
kate123
06-01 11:43 AM
Done.
-Thanks.
-Thanks.
2011 pictures quotes for dads
bkam
04-12 01:10 PM
My spouse and I are on L1/L2 visa.
In 2002 there was a law change and the L2 visa holders got the right for EAD, valid until expiry date of the current L1/L2 visa. Renewal of the EAD was relatively easy when the new L1/L2 visa was issued. The tricky thing is that after expiration of the L visa, while waiting for LC approval we can get only 1 year H1 extensions. This means that during the period between L1/L2 visa and submitting of I-485 the EAD will be cancelled.
Following the common sence, the L2 visa holder should still be able to get EAD for the period between L and I-485. We will find it out in half a year time when our last L visa expires. But I would not bet on it...
So, my hint is - why not push for a similar approach being applied for immigrants waiting for LC approvals (after 365 days), for I-140, I-485 etc. It makes sence since the enormous delay in GC process was caused by the US bureaucracy and the poor idiots like us deserve some relieve :-)
In 2002 there was a law change and the L2 visa holders got the right for EAD, valid until expiry date of the current L1/L2 visa. Renewal of the EAD was relatively easy when the new L1/L2 visa was issued. The tricky thing is that after expiration of the L visa, while waiting for LC approval we can get only 1 year H1 extensions. This means that during the period between L1/L2 visa and submitting of I-485 the EAD will be cancelled.
Following the common sence, the L2 visa holder should still be able to get EAD for the period between L and I-485. We will find it out in half a year time when our last L visa expires. But I would not bet on it...
So, my hint is - why not push for a similar approach being applied for immigrants waiting for LC approvals (after 365 days), for I-140, I-485 etc. It makes sence since the enormous delay in GC process was caused by the US bureaucracy and the poor idiots like us deserve some relieve :-)
more...
rameshvaid
06-17 10:52 AM
^^^^^^^^^
I have suffered a lot due to this stamping business and I have a thread on IV "STUCK IN MONTREAL" I was there for almost 2 months with 2 of my sons and wife. My oldest one lost his full smester of college, 2nd one was only in 4th grade and got lucky due to his excellent record in school and hence was promoted, due to this stamping business and I was poorer by 30K. I will do whatever needs to be done to get this bill rolling and am ready to share my story with any one..
This was my 3rd stamping with the same employer and 2nd one was also in Toronto in 2005 at that time I had no problems and this time my salary was almost 30% more tan the last one in 2005.
Great effort and Good Luck..
RV
I have suffered a lot due to this stamping business and I have a thread on IV "STUCK IN MONTREAL" I was there for almost 2 months with 2 of my sons and wife. My oldest one lost his full smester of college, 2nd one was only in 4th grade and got lucky due to his excellent record in school and hence was promoted, due to this stamping business and I was poorer by 30K. I will do whatever needs to be done to get this bill rolling and am ready to share my story with any one..
This was my 3rd stamping with the same employer and 2nd one was also in Toronto in 2005 at that time I had no problems and this time my salary was almost 30% more tan the last one in 2005.
Great effort and Good Luck..
RV
aroranuj
04-16 03:31 PM
That is accurate I have done 10+2+1+3
Ummm.. I did not know that one can do a diploma after 10th grade in India and after that, a year to get bachelors? You are right... its not very clear from the original post.. and can easily be misinterpreted as (10+2+3+1) which is 16 years of education.
OP, could you please confirm if this is the case with your background.
Ummm.. I did not know that one can do a diploma after 10th grade in India and after that, a year to get bachelors? You are right... its not very clear from the original post.. and can easily be misinterpreted as (10+2+3+1) which is 16 years of education.
OP, could you please confirm if this is the case with your background.
more...
ramreddy
01-31 05:08 AM
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
2010 dresses happy irthday quotes
nirenjoshi
01-04 10:34 AM
This sounds so much like those puzzles we used to ask each other... You have 2 batsmen each on 98 and only 3 runs to win. how will both get 100... or some such (this is actually very easy)- I dont recollect the exact question.
more...
plp039
10-02 01:46 PM
The only thing seems to be happening is that they are transferring cases from NSC/TSC to CSC/VSC for EADs, APs and I-485s for data entry and EAD/AP approval.
--> I thought I'd get the EAD since it's been 90 days from my filing.
--> I thought I'd get the EAD since it's been 90 days from my filing.
hair irthday quotes for dad.
pete
12-13 03:49 PM
The amount of lying and fraud that goes on in this process amazes. All under the cover of "legal"! There are compnaies doing this kind of utter crap and getting away with it.
I will tell you my story:
I am EB2. Physician now doing residency in Surgery. In Sept 2004 the University started my GC process and the lawyer went the full 9 yards.... to get my LC application in around the time PERM started. In fact my research job was on Monster.com for nearly a year. They weeded through so many applicants ( actually interviewed them!).
The program even paid my fees at 960 dollars a credit for PhD ( the plan was I get PhD as well and they would pay for it until I get Work permit). On H1B I could not be a full time PhD candidate. Thanks to retrogression I could not go ahead with that plan and the program spent thousands. I have had many presentations, papers both in the country and Europe.
I started residency so did my wife and we are waiting for this thing to work out. But we have seen so many of these "career GC applicants" jump the line and get ahead. If we are to argue about contributions made by Indians in science and technology how can we tyurn a blind eye to BS of this type. Where are hard working folks who play by the rules to go when peaple jump lines. It is bad as it is and gets worst by the day.
I dont want some half assed explanation that this is "legal". It ought to be stopped and that guy has to start at the back of the line. the full IV thing surprises me. They ought to take action on this .. atleast to prove they are serious about being honest and good and whatever else we claim to be.
thats all!!
I will tell you my story:
I am EB2. Physician now doing residency in Surgery. In Sept 2004 the University started my GC process and the lawyer went the full 9 yards.... to get my LC application in around the time PERM started. In fact my research job was on Monster.com for nearly a year. They weeded through so many applicants ( actually interviewed them!).
The program even paid my fees at 960 dollars a credit for PhD ( the plan was I get PhD as well and they would pay for it until I get Work permit). On H1B I could not be a full time PhD candidate. Thanks to retrogression I could not go ahead with that plan and the program spent thousands. I have had many presentations, papers both in the country and Europe.
I started residency so did my wife and we are waiting for this thing to work out. But we have seen so many of these "career GC applicants" jump the line and get ahead. If we are to argue about contributions made by Indians in science and technology how can we tyurn a blind eye to BS of this type. Where are hard working folks who play by the rules to go when peaple jump lines. It is bad as it is and gets worst by the day.
I dont want some half assed explanation that this is "legal". It ought to be stopped and that guy has to start at the back of the line. the full IV thing surprises me. They ought to take action on this .. atleast to prove they are serious about being honest and good and whatever else we claim to be.
thats all!!
more...
DoggyStyle
07-21 11:48 PM
If the sale takes place, it probably will be bought by either a Chinese or Indian company. Some dumb anti-immigrationists will try to block legal migration every possible way when most of their companies are either taking jobs overseas or getting sold to foreign companies. Go and find the source of what has destroyed the economy and try to fix it. No foreigner has ruined the economy.
I agree. They just blame Indians for everything they fail.
I agree. They just blame Indians for everything they fail.
hot today would be dad#39;s birthday.
drirshad
02-20 05:02 PM
http://www.immigration-law.com/Canada.html
02/20/2008: USCIS Releases FBI Namecheck Policy Q&A Today
* The Q&A indicates that there are about 47,000 cases that fall under this changed policy and most of these cases are expected to be processed by mid-March 2008.
02/20/2008: USCIS Releases FBI Namecheck Policy Q&A Today
* The Q&A indicates that there are about 47,000 cases that fall under this changed policy and most of these cases are expected to be processed by mid-March 2008.
more...
house quotes for dads birthday.
regacct
04-14 01:13 PM
I thought immigration issues were the responsibility of federal govt. Can states pass immigration laws? Whether it is unauthorized aliens or otherwise?
if the states can take actions, why are we banging our heads with the fed?
if the states can take actions, why are we banging our heads with the fed?
tattoo irthday quotes for dad.
gcformeornot
08-09 08:13 PM
I don't care about LS. Almost all cases I know are fraud. Sometimes 2 guys got GCs on same labor(since they were not asking Original LC). Thank god USCIS banned LS.
God Bless USCIS for banning LS.
God Bless USCIS for banning LS.
more...
pictures happy irthday father quotes.
NNReddy
09-20 04:09 PM
When was your EAD and AP issued? what date.
dresses cute quotes about dads.
gcdreamer05
02-11 10:43 AM
I saw the doc great work and thanks for putting in teh effort.
So in layman terms can you please explain, how many EB3 visas are allocated per month or per year and how many are necessary as per your doc, that will atleast help us understand how slow its gonna move,
are we talking about 15 days in one visa bulletin movement for EB3 or 30 days (1month) movement in one visa bulletin.
If we can do this , then we can predict how long it would take?
So in layman terms can you please explain, how many EB3 visas are allocated per month or per year and how many are necessary as per your doc, that will atleast help us understand how slow its gonna move,
are we talking about 15 days in one visa bulletin movement for EB3 or 30 days (1month) movement in one visa bulletin.
If we can do this , then we can predict how long it would take?
more...
makeup poems for dads birthday. poems for dads birthday.
cheg
08-22 06:44 PM
Hi JunRN. After reading your post I googled if labor certification does have an expiration. According to: http://www.hooyou.com/lc/faq.html , it doesn't. Did you have to re-apply for yours? Thanks!
Make thing worse....your labor expires after six months, so you have to re-apply again..and again...and again...and again...and again....
Make thing worse....your labor expires after six months, so you have to re-apply again..and again...and again...and again...and again....
girlfriend funny irthday quotes for dad; quotes about dads. funny irthday quotes for
Jimi_Hendrix
12-12 01:01 PM
In short they do not want us here.. they want to suck the money out of you, all the money you earned and saved.
Were you making sure that we are not disappointed? :)
Thanks for living upto the expectations buddy :D
Were you making sure that we are not disappointed? :)
Thanks for living upto the expectations buddy :D
hairstyles girlfriend quotes for dads
alterego
12-04 08:14 PM
this sounds more like, "Ok so you say the glass is half full, why is that great now?"
It is a feel good factor; you still want to be cynical, go right ahead, no one can take that away from you.
You call it cynical. I call it realistic my friend. If it makes you "feel good" and thats why you support the idea then fine. However the thread was started stating this is somehow good for our money. I am not convinced.
My point is, firstly this is a far way from fruition, and even if it happens there will be a queue of gov't bureaucrats lining up and licking their chops to meddle with it. Furthermore the leftist parties there will ensure that every socialist policy in the books will be applied to your so called retirement funds. A steady revenue stream of that magnitude will not be left in peace. That much I can assure you.
It is a feel good factor; you still want to be cynical, go right ahead, no one can take that away from you.
You call it cynical. I call it realistic my friend. If it makes you "feel good" and thats why you support the idea then fine. However the thread was started stating this is somehow good for our money. I am not convinced.
My point is, firstly this is a far way from fruition, and even if it happens there will be a queue of gov't bureaucrats lining up and licking their chops to meddle with it. Furthermore the leftist parties there will ensure that every socialist policy in the books will be applied to your so called retirement funds. A steady revenue stream of that magnitude will not be left in peace. That much I can assure you.
Michael chertoff
10-26 04:11 PM
Another news making. Advice to all of Youngster Indians and Indians here by the India's outsourcing chop shop IT messihah Infosys Chief.
Don't look at IT industry as means to settle abroad: Narayana Murthy - The Economic Times (http://economictimes.indiatimes.com/tech/ites/Dont-look-at-IT-industry-as-means-to-settle-abroad-Murthy/articleshow/6815589.cms)
Mr. Sakthisagar, You are correct. we need people like you. you are so concerned about INDIA. please let me know How can I help.
BTW only Narendra Modi can solve this issue too.
MC
Don't look at IT industry as means to settle abroad: Narayana Murthy - The Economic Times (http://economictimes.indiatimes.com/tech/ites/Dont-look-at-IT-industry-as-means-to-settle-abroad-Murthy/articleshow/6815589.cms)
Mr. Sakthisagar, You are correct. we need people like you. you are so concerned about INDIA. please let me know How can I help.
BTW only Narendra Modi can solve this issue too.
MC
nefrateedi
08-22 04:12 PM
I can guarantee that u r screwed for next 3+ years if it was EB2 and next 6+ years if it was EB3.
Well, go ahead and cry in the bathroom now instead of actively supporting IV.
Give the guy a break...he's just asking around as to what his options are... besides, one can't 'GUARANTEE' for how long a period of time one would have to wait as far as priority dates are concerned. The July Fiasco confirmed that, if anything...I agree that the rally is very important in making further strides, however there's no reason to be so harsh...
abhidos37, unfortunately since your application was received when your priority date wasn't current, you're going to have to wait until your priority date becomes current again.
Good luck!
Well, go ahead and cry in the bathroom now instead of actively supporting IV.
Give the guy a break...he's just asking around as to what his options are... besides, one can't 'GUARANTEE' for how long a period of time one would have to wait as far as priority dates are concerned. The July Fiasco confirmed that, if anything...I agree that the rally is very important in making further strides, however there's no reason to be so harsh...
abhidos37, unfortunately since your application was received when your priority date wasn't current, you're going to have to wait until your priority date becomes current again.
Good luck!
0 comments:
Post a Comment